Suzhou Manyoung New Materials Co.,Ltd
Suzhou Manyoung New Materials Co.,Ltd
Add to Cart
Diamond machining for 0.03mm concentricity zirconia ceramic rods
Description:
The ceramic plunger is mainly applicable to petroleum industry, chemical industry, food industry, which is used to replace the metal plunger and solve the problems of poor corrosion resistance, low-temp resistance, short service life. It has high performance of wear-resistance, corrosion-resistance and shock resistance. Compared with metal plunger, the service life of ceramic plunger is 6-10 times longer. Ceramic plunger can not only greatly improved the output of crude oil, but also reduce the cost of viscous oil production.
Zirconium oxide ceramics have the highest toughness and strength at room temperature of all the advanced ceramic materials. It also has high thermal expansion, low thermal conductivity and high resistance to corrosion. Its unique resistance to crack propagation and high thermal expansion make it an excellent material for joining ceramics and metals such as steel.
Technical Parameters:
| Test item/Unit | Numerical Value | Test item/Unit | Numerical | ||||
| Product Material | Alumina | Zirconia | Product Material | Alumina | Zirconia | ||
| Component Content % | ≥99% | ≥95% | ≥90% | Volume Resistance MM | >1012 | >1012 | >1012 |
| Sintering Temp ℃ | 1780-1800 | 1650-1680 | 1550-2600 | Bending Strength Mpa | 400 | 320 | 1100 |
| Specific Gravity g/cm3 | ≥3.8 | ≥3.6 | >6 | Thermal Expansion Coefficient'10' | 6.8-8.0 | 6.2-8.5 | 6.9-10 |
| Breakdown Voltage Strength kv/mm | 15 | 15 | 15 | Roughness um | ≤0.8 | ≤0.8 | ≤0.8 |
| Bibulous Rate% | <0.01 | <0.01 | <0.01 | Mirror Polished Ra | ≤0.05 | ≤0.1 | ≤0.05 |
| Anti Pressure Mpa | 3700Mpa | 2400Mpa | 5000Mpa | Thermal Conductivity W/m.k | 25 | 20 | 25 |
| Hardness Hra | ≥88 | ≥82 | ≥88 | Temperature Resistance ℃ | 1700 | 1600 | 1800 |
Advantages:
1. High heat resistance .
2. Good wear resistance .
3. High corrosion resistance .
Application:
1. Kiln furniture, components & accessories.
2. Thermocouple protection tubes.
3. Heater Support Elements.
4. High Temperature Electrical Insulators.
5. Extreme temperature measurement components.
More pictures:
FAQ:
Q: Are you a trading company or a manufacturer?
A: We are professional manufacturer which has almost 5 years of experience in this industry.
Q: Can you produce according to the samples?
A: Yes,we can produce by your samples or technical drawings.
Q: Would it be possible for us to visit your factory?
A: Sure,we welcomed our customers visit our factory in any time.
Q: Will your company supply samples?
A: Yes,the sample expense will be deducted from the value of your order.